A Thorough Guide Of How to Get Resin Out of a Bowl

Resin is one of the most stubborn substances to deal with and the worst part is getting rid of the leftovers from bowls.

Are you having trouble with resin to get out of your bowls? Tired of trying out unsuccessful hacks? We know! It’s not an easy process. 

Hence, you’re here searching for this question- how to get resin out of a bowl?

Undoubtedly resin is hard to get rid of but if we know some tips and tricks, the process gets easier. In order to do that, we can try coffee filters or maybe alcohol of a higher percentage. We can also follow some simple steps like microwaving the bowl or saltwater. 

However, it is not always the case that you can get rid of it 100%. That said, you can come pretty close to getting resin out of the bowl.

Here, we have some amazing solutions for everyone to make your journey easier. Let’s have a look at some easiest ones-

Quick Fix to Get Resin Out of Bowl

Before jumping into anything complex, we can try out some easy hacks, right? Sometimes, we have the substances available just a step away and we cannot take the advantage of those the lack that knowledge.

Let us have a look at some-

Using Salty Water

At the start of it all, pour warm salty water into your resin bowl and let the water sit for a while. Here, salt will help to dissolve the resin into small pieces. Thus, it would leave the surface of the bowl easily.

Other than that, keep the bowl where there is less airflow. And, you’ll have to keep it for at least 1-2 hours for the salt to do its job.

After that, scrub the bowl out and you will find your resin dissolved in the water from the bowl surface. You can strain the water to separate the resin out. 

Important Tip: Do not use salt if you want to reuse the resin. It might not get the same vapor out of it.

Four Easiest Methods To Get Resin Out Of Bowl

There are some easiest hacks to get resin out of the bowl. Let us know about those step by step.

Method #1: Use a Coffee filter

Coffee filters are something that can be found in almost every house. Let’s see the steps to follow for coffee filters.

Step 1: Put boiling water on your bowl which has resin on its surface. Make sure the water is at the boiling point.

Step 2: Try to scrape the resin out with a sharp tool from the bowl’s surface. (our pick: Resin Scraper)

Step 3: Gather as much resin as possible through scrapping and let it mix with water. Let the mixed resin water set for a while after scraping.

Step 4: Set a coffee filter as a strainer and pour all the liquid through it. The filter will collect all the resin on it and strain out the water from it. Thus, you will get most of the resin out of the bowl.

Method #2: Microwave the Bowl

Microwaving a bowl is probably the simplest method to get resin out of the bowl. Let us know about the hack in detail.

Step 1: Fill the bowl containing resin with water. 

Step 2: Put the bowl into your microwave oven and set the temperature to bring it to a good boil. 

Step 3: Wait until the water of the bowl changes its color into ashy brown and bubbles out the steam.

Step 4: Take the water out of the oven and let it get a little cold and set it for a while. 

Method #3: Using Rubbing Alcohol

Rubbing alcohol is one of the most effective methods of all for getting resin out of the bowl. Let’s explore the steps in detail.

Step 1: Pour alcohol inside your bowl (alcohol percentage should be above 70%). Isopropyl alcohol is a good option for it.

Step 2: Let the bowl be soaked with alcohol for a good 2-3 hours. This will help the alcohol to liquefy the resin.

Step 3: Scrape the bowl well. You don’t even need to scrape it much if your alcohol percentage is high.

Step 4: Strain the alcohol with a filter paper or strainer to get the resin and the alcohol separated.

Method #4: Using Baking Soda and Vinegar

The Baking soda and vinegar combo are famous for its effectiveness in different problems and the resin problem is one of those.

Step 1: Both baking soda and vinegar are very active ingredients in terms of breaking substances down. Soak your resin stained bowl with vinegar.

Step 2: Keep the bowl sealed for at least 30 minutes (The longer it soaked the better it results). 

Step 3: Take the bowl and pour the alcohol into another bowl. Use baking soda on the surface and rub it with a scrubber.

Step 4: The baking soda will take off all the resin out of the bowl and you will see quite an amazing result. 

Tip

Baking soda might help to get the bowl clean from the resin. But if you aspire to reuse the resin that might be difficult for you.

Three Common Mistakes We Make While Using Resin

There are some common mistakes we make while working with resin and that makes it more difficult. Few things we can keep in mind to avoid those difficulties.

Let us discuss three common mistakes we frequently make with resin-

Mistake 1: Keep the Bowl/Resin Tools Clean

It is required to keep the resin bowl and tools clean so that no germs or bacteria can grow in them. Thus, we can keep the process hygienic and healthy.

Mistake 2: Use a Silicon-Based Bowl/ar for It

Most of the time we use glass bowls with resin. But at times, it gets harder to get rid of it from a glass bowl. If we can use a silicon-based bowl, the process of getting rid of it will become easier. 

Mistake 3: The Older the Stain, the Tougher it is to Remove Resin

We need to clean the resin-containing bowl frequently to prevent the stain from getting harder as well as the growth of unwanted germs.

What Happens When You Don’t Get Resin Out of a Bowl?

If there is resin in your bowl you have to keep in mind that you should get out of it as early as possible.

Because the resin is a substance that contains carbon along with some other substances. Here, it’ll get tougher with time and if you want your bowl clean and usable you have to clean it quite often.

Sometimes, the stain is so tough that with time it gets discolored and turned into a pink spot. The next step is quite dangerous. It can turn into fungus and bacteria which will cause serious health issues afterward.

FAQ’s

Final Words

We hope you get the overall idea of how to get resin out of a bowl with some minimal steps. One added tip for you, if you cannot get resin fully out of the bow then you might need to change the bowl as early as possible.

That’s it, follow the methods carefully as you don’t want to increase your misery. Good luck!