How to Make Planar Resin Flatbacks? [6 Easy Steps]

So, let’s say you are very enthusiastic about DIY crafts. Or maybe you’ve seen your friend using these really cool planar resin flatbacks. Either way you may want to make your very own planar resin flatbacks. 

Now, you’re wondering how to make planar resin flatbacks?

To make your own planar resin flatbacks, you need some necessary tools. First, you need to make the resin charm and drill a hole in that charm. Then paint the charm and put a screw in the resin. Finally, use a heat gun to remove all the remaining resin bubbles.  

Does the whole process sound daunting to you? Don’t worry. We’ve included 6 necessary steps you need to follow to make your own flatbacks easily! 

Keep reading to find out!

Why Should You Make Planar Resin Flatbacks?

Planar resins are flat resin charms. Planar resin flatbacks are very popular in the DIY world. They can be of different shades and sizes to meet the customer’s needs. 

Planar Resin Flatbacks can be used to make your own crafts. You can create hand-made flowers, shoes or hair clip, hair bows, and other accessories. They can also be used in Holiday gifts decoration or as a Fridge badge and Mobile phone case.

Steps To Make Planar Resin Flatbacks

By now you already know how on-trend planar resin flatbacks are. So to keep up with this trend you can make your very own planar resin flatbacks. 

 Making planar resin flatbacks is not a very easy task. You need to gather some necessary elements and follow each step accordingly to get this done. 

Here’s a step-by-step guide on how you can make your very own planar resin flatbacks: 

Step 1: Get the Necessary Tools

The first step is to make sure you have all the required tools for the job. Here I have mentioned all the necessary supplies you’ll need to complete the process:

• Resin
• Safety gears such as Apron, latex gloves, safety classes, drop clothes etc.
• A spatula and mixing spoons
• Small size measuring cup or jug
• Moulds or casing

Now, that you have gathered all the tools, let us get into the making part. 

Step 2: Make The Resin Charm

After you have all the necessary tools ready, now it’s time to start the actual process.

Begin with taking a small cup and pouring the resin into it. Then stir it properly with a spoon. After you are done mixing your resin, pour it into your preferred mould or casing.

Next, glaze the planar and set it into the mould. Try to thrust it all the way down into the resin. Otherwise, it won’t set properly. 

While doing this, look for any bubbles beneath. Then add glitters if you want.

Step 3: Drill a Hole in Resin

The next step is to drill holes in your resin planars. Try your best to drill it without causing any cracks. 

Start off this step by positioning your planar face down on any solid surface. Use an artist tape and place it exactly where you want the hole to be. Then keeping the driller steady drill a small hole in that place. 

Thus you can prevent the planar from cracking while you’re drilling holes.

Step 4: Mix Acrylic Paint With The Resin

Adding more colours to your resin is always a good thing. So, using acrylic paint can give an awesome look to your resin. If you are using liquid acrylics, try to maintain the 1 to 10 ratio method.

According to this rule, you have to mix one part of acrylic with 10 parts of planar resin. Pour it carefully though, or else your resin might get clumpy.

Step 5: Use A Heat Gun

If you are noticing any remaining bubbles in your resin, use a heat gun. It can be your best option in this. It perfectly removes any remaining bubbles present inside the resin planar.

Firstly, make sure to keep the distance between the heat gun and resin about 3 inches. Next, go over the surface of the resin in a circular motion. You will notice the bubbles pop.

For bubbles that are stubborn, move the heat gun a little closer. Extra heat should make them pop. It works nicely when those bubbles are stuck in any corner of your resin.

Try to keep the temperature at a minimum at first. Then increase if necessary. It will remove all the lasting bubbles.

Step 6: Put a Screw in Resin

By the time you are done with all the steps mentioned above, your resin planar should be hardened. 

Now you need to drill a pilot hole to put your screw in. The hole should be a bit smaller than your screw. Thus you can make sure no harm is done on the surface while drilling.

After that, insert the screw into the hole. After some time you will notice it becoming harder than the wood. 

Additional Tips

Sometimes even after following the whole process, the planar resin charms don’t come out good. This could happen due to a lot of reasons.

So, to prevent your hard work from going to waste, here are a few tips that you can follow:

• For drying fresh flowers, you can use silica gel. It dries out a flower quite quickly. 
• Refrain from using borax as it takes at least 5-14 days to dry. 
• You can use hardeners and low viscosity resin to make beads around your charms.
• Generally, epoxy resins are easier to handle. So, if you’re a beginner start making flatback charms by using epoxy resin. 

FAQs

Verdict

With that, we’ve reached the end. I hope by now you’re clear regarding how to make planar resin flatbacks? 

Just another quick tip before you start making your own. Do not put any fresh flowers or real food inside your resin.  Over time these will start to rot inside. This will ruin your entire effort. 

That’s all for today! Keep crafting!