How To Install Closet Rod Without Drilling
You have a closet that you’re ready to pack with your clothes. You need to set up a closet rod to hang up your clothes.
But drilling is seeming way more hassle than you want to go through.
So you ask, how to install a closet rod without drilling?
The best alternatives are tension rods, and adhesive hooks. They are not the most weight-bearing solutions but more than enough for hanging clothes. Also if you need a more sturdy solution, use an extra piece of wood to screw into the wall. And rest your rod onto that.
Well, there you have it. But for you, we prepared a much more detailed guide. Let’s hop onto that!
What's On the Page
What Are The Alternatives To Drilling A Closet Rod?
A closet rod is a must-have to properly utilize the space in your closet. You can hang your clothes there and easily organize them.
The main concern is how to support a closet rod. And we need to drill mainly to install the support.
But the usual method of installing a closet rod is to drill holes in the wall and install a stud. In the stud, the rod is installed. This way the rod is supported by the stud, which is screwed into the wall.
The hole for the screw is made by drilling holes in it beforehand. You need a drill and some expertise to do it properly.
If you don’t have the correct tools in hand then you have to arrange for that. And the skill to drill perfectly isn’t common as well.
Generally, if the process of installing a closet rod didn’t need drilling, it would be a much easier process.
The popular choices for drill-free closet rod installation are tension rods and adhesive hooks.
Also for a sturdier solution, there is drilling a hole into a piece of wood beforehand.
And then attach the wood with a screw. And resting the closet rod on top of that.
Let’s discuss each method in detail. So that you can decide which one is preferable to you.
Discussion On The Alternatives
The alternatives that we have are tension rods, adhesive hooks, and lastly a spare wooden plank. Each has its own pros and cons and not everyone will like all of them.
Talking about them more will show you what they have to offer. And you can choose which one suits your closet or room space best.
So let’s get to them one by one.
1. Tension Rods
Tension rods are closet rods that are retractable and expendable. They have rubber-like structures at both ends so that they can create friction and grip.
The way to use them is you position your rod where you want to place it. Then open its moving end and stretch it so that it is tightly gripping the wall from both ends. And then you lock the moving part in its place.
The rod hangs on by gripping the two ends of the wall or closet where you placed it. Now you can hang your clothes on the rod.
These rods have a maximum weight carrying capacity. Which is surely less than a rod supported by a stud. But usually, you’re going to use them to hang clothes and other very light stuff.
So if you’re asking how to install closet rod in drywall, this can be an easy way to do so.
2. Adhesive Hooks
Adhesive hooks are pretty popular as hanging devices on their own. But with a little bit of creativity, they can be used as a pretty good closet rod holder as well.
Adhesive hooks are little plastic things that have a curved metal hook on one side. And a layer of strong adhesive on the other.
They are very popular household items, mainly used in kitchens and bathrooms to use as utensils or rack hangers.
You’re looking for how to make a closet rod support. Using 3 to 4 adhesive hooks will do the job for you. Because the adhesive they use is pretty strong.
If you use multiple at once then your closet rod will be secured properly.
3. Using A Separate Wooden Plank
If you don’t have any stud to use, and don’t have a drill nearby. But you intend to put a lot of pressure on the closet rod. Then this one might be for you.
Also installing rod in a closet becomes pretty hard when you have to reach very tight angles with your drill. So instead of drilling and screwing a stud, you use an extra bit of wood.
You measure the wood, after knowing how far does a closet rod need to be from the wall. Then you cut them and make grooves where the closer rod will rest.
Then you screw in the wood directly. You should use an electrical screwdriver here as it’ll take a bit of force. But it will go through.
Here are some of our preferred electrical screwdriver models out there:
- Klein Tools 32500 11-in-1 Screwdriver / Nut Driver Set
- BLACK+DECKER Cordless Screwdriver with Pivoting Handle
Hopefully, these options work out for you and make it easier!
Do the same for the other side as well. Now they are both secured in their places. So you can install your closet rod now.
This method will give you much more stability and a more professional look.
Precautions to Look Out For
The biggest concern when you’re setting up a closet rod is the weight handling capabilities.
The tension rod can handle the weight of clothes pretty well, but if there are any defects in the rod then it’ll cause a problem. So check, if it extends properly and the locking mechanism works properly.
The same goes for the adhesive hooks. If due to some manufacturing defect, the adhesive is lightly applied, then it won’t be able to bear weight as much.
Purchasing a few more than necessary is always preferred. As these are quite cheap.
Well, looks like you’re all set for a drill-less closet rod installation.
FAQs
How Far Should Closet Rod Be From Wall?
The distance should be at least 12 inches from the rod center. Also, a common convention is to place the rod in the middle of the closet.
What Is The Cheapest Material For Closet Doors?
The cheapest wood for closet doors is pine. You can also look into cheap bi-fold doors which can be found pre-made.
What Is The Proper Height To Hang A Closet Rod?
It should be at least 60 inches from the bottom of the closet if it’s a single rod. That way long hanging clothes will be fitted properly. And if you’re using two rods then one should be 80 inches and another should be 40 inches above.
Wrapping Up
Well, here’s how to install a closet rod without drilling. Hopefully, now it’ll be much easier for you to get your job done. Don’t forget to use a spirit-level though.
Best of luck with your future projects!
Robert Larry is a woodworking enthusiast, carpenter, creative wood art designer, and spokesperson. He has a passion for crafting unique and functional pieces from wood, and over the years, He has honed his skills to develop a distinctive style that blends traditional carpentry techniques with a modern, artistic touch.
In addition to his work as a carpenter, He is also a writer, sharing his knowledge and experiences through articles and blog posts on the craft of woodworking. With a keen eye for detail and a deep appreciation for the natural beauty of wood, He creates pieces that are not only functional but also beautiful works of art.