How to Build A Drawer Without Slides: A complete Guide

Drawers are necessary for storing clothes as well as other important items. As a result, it is essential to construct a great drawer. It’s acceptable if you don’t comprehend how drawers are made.

So, how to build a drawer without slides?

In this article, I’ll go over the five procedures you must do in order to construct the ideal drawer. The first step is to establish the height; the second step is to measure the drawer opening. The third step is to drill pocket holes and then add the front false drawer.

Are you still unsure about the procedures? Actually, This is just a general idea. In the meantime, here are the procedures you should follow to design your drawer.

Let’s get started.

Build Drawers Without Slides

In this phase, I’ll begin designing an excellent and sturdy drawer without the need of slides.

Before you begin the main operation, you must gather certain tools or equipment. These pieces of equipment enable you to construct the drawer without the use of slides in a simple and professional way.

• Table saw
• Miter saw
• Hammer
• Wood glue
• ¾  inches wood
• ¼ inch Polywood

Have you gathered the necessary tools and equipment? If this is the case, go to the next step.

Step 1: Determine the Depth of the Drawers

First and foremost, you must determine the correct drawer height. For my drawer, I utilize the rule of thumb of opening and subtracting 1 to 1/2 inch. Which helps me achieve the closet half-inch measurement.

Second, I used a 1-1/8-inch subtract and made my drawer 6 inches tall with a 7-/1.8-inch opening. In addition, the measurement can be increased or decreased without difficulty. You’ll also need a 1-inch opening if you’re using dimensional timber for your drawer.

You could already have plywood on hand for your project. Am I correct? Now is the time to cut down the 3/4-inch plywood for the cabinet drawer to build the 6-inch broad stripe.

Step 2: Take a Measurement of the Drawer’s Opening

Hey! You’ve already completed the first stage successfully. Now it’s time to go on to the second. But, you may want to battle through this process. Don’t worry. I present you with clear directions that will assist you in effortlessly completing the next steps.

Begin by taking measurements of the drawer you wish to make. After you’ve finished it, you’ll have to subtract the amount of space it takes up in your drawer.

If you’re wondering how to create a drawer with slides, keep this in mind. Then all you have to do now is add slides. You can skip the slides if you don’t want to.

Because the back and front of the DIY drawer are wedged between the sides, you must also account for them. If you’re using 1x material that’s 3/4-inch thick, you’ll just need to subtract about 1-1/2 inches.

When using plywood, it’s a little trickier because the plywood is just 3/4-inch thick.

Instead, I set up the miter saw that I had already gathered. It assisted me in stopping the block from reaching the full drawer. Then, against the stop block, I put two pieces of plywood.

I only keep my front & backside of the drawer spacer bits at the bottom of the drawer now. Furthermore, before marking your cut line, you should measure it.

Step 3: Make the Pocket Holes By Drilling Them

Cut the pocket hole and build your drawer box now. Pocket hole joinery has now been used to link the drawer’s front and rear sides. I’m sure you already have the drilling tool to drill pocket holes.

What comes next? The next step is to use your pocket holes to secure the drawer slide to the front and back. The pocket hole screw parts must then be secured.

You can get a drilling tool by purchasing one of the following recommendation lists:

• BLACK+DECKER 20V MAX* POWERECONNECT Cordless Drill/Driver

These options should help you find what you’re looking for.

Step 4: After You’ve Cut Your Drawer Bottom, Install It

Generally, it is the final stage that you must do. This stage is much simpler than the previous one. All you need to do is measure the width and depth of your drawers. After that, cut a 1/4-inch plywood panel to size.

Don’t forget to put some adhesive in the drawer’s bottom line. You should only use a small amount of adhesive. After attaching the drawer, proceed with the instructions below:

• With a nail gun, use a 3/4-inch bottom brand nail.
• Maintain a 1/2-inch distance between the nail and the front of the outer edge.
• After that, make a notch on the bottom of the drawer wood with a router and a 45 ° angle chamfer bit.

Step 5: Insert a False Drawer Front into the Drawer Box

Hey! We’re here to see things out. There is still work to be done, so are you ready? If so, we’re ready to go on to the final step.

A false drawer front may or may not be necessary, depending on the design and construction methods you employ. However, you’ll find two of the most popular options right here.

Method 1: Attach the Drawer

This method is commonly used for storage drawers. This method can be used when you build a storage drawer.

Method 2: Excessive Drawer

There is an over-drawer in the entry frame above the other drawers. It is, however, simple to trim the portion to the right size and shape. Afterward, you should use your 1-1/4-inch screw to attach them to the DIY drawer’s front.

As of this moment, your drawers are done. You don’t need any slides to build your drawer. You can fix your drawer without slides If you don’t want to use it.

FAQs

Final Word

That is all on how to build a drawer without slides. I hope that the preceding information has answered any queries you might have about this issue.

If you continue to have problems with this issue, you can consult with an expert.

I wish you luck!